A Code of Practice provides practical guidance for people who have work health and safety duty of care in the circumstances described in the code. These codes do not replace the WHS laws but give guidance on:
A code of practice may include:
In most cases, following an approved Code of Practice would achieve compliance with the duty holder’s health and safety duties in the Act, in relation to the subject matter of the code.
While duty holders must comply with the underlying occupational safety and health laws, the preventative strategies outlined do not represent the only acceptable means of achieving a certain standard.
We recognise that equivalent or better ways of achieving the required work health and safety outcomes may be possible. For that reason compliance with codes of practice is not mandatory providing:
Codes of Practice deal with particular issues and do not cover all hazards or risks which may arise. The health and safety duties require duty holders to consider all risks associated with work, not only those for which regulations and Codes of Practice exist.
The Codes of Practice listed below are the approved codes for South Australia.
Not all topics relating to work health and safety have an approved Code of Practice. Navigate our website for work health and safety advice on topics not covered below.
If you have a specific question or concern please contact us for advice.
Transitional arrangements enable the following Codes to continue to operate in South Australia while national codes are developed. These codes and standards may be used however references to legislation may not be current.
In South Australia, a construction project is a project that involves construction work where the cost of the construction work is $450,000 or more.
Page 8 and page 18 of the Demolition Work Code of Practice states that a construction project is a project that involves construction work where the cost of the construction work is $250 000 or more. This is not the case in South Australia. A construction project is a project that involves construction work where the cost of the construction work is $450 000 or more.
In South Australia, high risk construction work means construction work that involves a risk of a person falling more than 3 metres.
Page 21 and page 36 of the Demolition Work Code of Practice states that high risk construction work means construction work that involves a risk of a person falling more than 2 metres. This is not the case in South Australia. High risk construction work means construction work that involves a risk of a person falling more than 3 metres.
In South Australia, a construction project is a project that involves construction work where the cost of the construction work is $450 000 or more.
Page 7 and page 18 of the Excavation Work Code of Practice states that a construction project is a project that involves construction work where the cost of the construction work is $250 000 or more. This is not the case in South Australia. A construction project is a project that involves construction work where the cost of the construction work is $450 000 or more.
In South Australia, high risk construction work means construction work that involves a risk of a person falling more than 3 metres.
Page 20, 39 and page 41 of the Excavation Work Code of Practice states that high risk construction work means construction work that involves a risk of a person falling more than 2 metres. This is not the case in South Australia. High risk construction work means construction work that involves a risk of a person falling more than 3 metres.
In South Australia, air monitoring is required for the removal of both friable and non-friable asbestos.
Page 26 of the How to Safely Remove Asbestos Code of Practice states that air monitoring is not required when removing more than 10sq m of non‑friable asbestos. This is not the case in South Australia. Air monitoring is required when removing friable asbestos and designated quantities of non-friable asbestos.
The Code further states on page 27 that air monitoring may be carried out before and during Class B asbestos removal work. In South Australia, air monitoring is a mandatory requirement for both Class A and Class B asbestos removal work.
Also on page 27 the Code states a PCBU that commissions asbestos removal work at a workplace is only required to ensure air monitoring is undertaken for Class A licensed removals and to communicate the air monitoring results (as stated on page 28). In South Australia, PCBUs commissioning asbestos removal work at workplaces must ensure air monitoring is undertaken and the results communicated for both Class A and Class B licensed removals.
In summary, in South Australia:
In South Australia, high risk construction work means construction work that involves a risk of a person falling more than 3 metres.
Page 7, 28 and page 43 of the Managing the Risk of Falls at Workplaces Code of Practice states that high risk construction work means construction work that involves a risk of a person falling more than 2 metres. This is not the case in South Australia. High risk construction work means construction work that involves a risk of a person falling more than 3 metres.
Where an approved Code of Practice references Australian or Australian/New Zealand Standards, the risk controls specified in those standards must also be complied with. All Australian Standards provide examples on how to control particular risks and should be considered when determining a suitable control measure.
Our library has the following Australian Standards available for loan:
An inspector can refer to a code of practice when issuing an improvement or prohibition notice.
Under the WHS Act, codes of practice are admissible in court proceedings.
Courts may regard a code of practice as evidence of what is known about a hazard, risk or control, and rely on it to determine what is 'reasonably practicable' in the circumstances to which the code relates.
